Lorentz PSK AC Solar Water PumpLorentz Logo

Lorentz Solar Water Pumping Systems are some of the most efficient pumping systems in the world.  The 3-Phase AC motor design allows you to harness the sun for all your pumping needs.  Capatible with any 3-Phase 50 or 60 Hertz Motor.  Ask about coupling the PSK controller with other motor combinations.

Lorentz PSK System Overview

- lift up to 520ft.
    - flow rate up to 578 GPM
    - simple installation
    - maintenance free
    - high reliability and life expectancy
    - cost-efficient pumping
    - 2 years manufacturer's warranty against defects in material and
      workmanship

Applications


    - drinking water supply
    - livestock watering
    - pond management
    - pipeline and irrigation
    - irrigation
    - Etc.

PSK Controller


    - controlling of the pump system and monitoring of the operating
      states
    - mounted at surface (no submerged electronic parts)
    - two control inputs for well probe (dry running protection), float or
      pressure
      switches, remote control etc
    - automatic reset 20 minutes after well probe turns pump off
    - protected against reverse polarity, overload and high temperature
    - data logger for historical dates: running time, starting/shut down      
      time of day, max. power/voltage of day, accumulated energy of day
      etc.
    - solar operation: integrated MPPT (Maximum Power Point Tracking)
    - battery operation: low voltage disconnect and restart after battery
       has recovered
    - display of current running data such as: input/output current/power/voltage, pump speed, temperature speed control selectable,
      max. and min. speed
    - input: Voc 750 VDC, Vmp 500 VDC
    - output: 400 VAC 3-phase, 30-60 Hz
    - max. efficiency 97 %, advanced IGBT
    - enclosure: IP 41 (sealed, weatherproof)
    - ambient temperature: -10 to +45° 

AC 3-PhaseDrive Motor


    - corrosion-resistant, all stainless steel exterior construction
    - stainless steel splined shaft
    - NEMA mounting dimensions
    - hermetically-sealed windings
    - water lubrication
    - pressure equalizing diaphragm
    - max. submerged depth: 2,260 ft
    - max. water temperature: 30°C/86°F
    - PH value: 6-9
    - IP 68

Pump end (PE)


    - centrifugal mulistage direct-coupled pump end
    - non-return valve
    - material: stainless steel (AISI 304), rubber
    - dry running protection (optional)
    - max. sand content: 50 g/m3, a higher content will wear the pump and reduce its life span considerably
    - max. salt content: 300-500 ppm at max. 30°C/85°F, higher salt contents require lower water temperatures
    - pH value: 6-9
    - high life expectancy
Example PSKLorentz PSK Pump System