Solar Powered Surface Pumps

GenPro Energy Solutions is implementing surface pumping systems for livestock pipeline applications throughout the world.  Range lands that normally hold water in dugouts and dams have been unusually dry.  By using a surface pumping system you can utilize range lands far away from the originating water source.

 The most economical DC water pumps are surface (non-submersible) pumps. They can reduce pumping energy consumption by half or more, compared to conventional AC powered pumps.

Surface pumps can pull the water up to 20 feet (suction capacity) and lift or push up to 900 feet. GenPro Energy's specialized Lorentz and Dankoff pumps have a wide range of application and can provide as little as 0.5 gallons per minute and up to 70 gallons per minute. Surface pumps are not weather resistant and must be protected from weather and freezing situations.


Solar Force Surface Pumping System
Location: Vale, South Dakota
Example Solar Force Piston Pump Installation
 

  Example: Surface Solar Pumping System
  Manufacture: Dankoff
  Model: Solar Force Surface Pump 302024-PV
  Solar Modules: (3) BP 150W. 24VDC
  Total Lift: 165 ft.
  Pipeline Distance: 5,800 ft.
  Total Daily Volume: 2,100 Gallons
Surface Pumping Systems Dankoff Pumps

Solar Force Piston Pump

Conergy Solaram Pump Solar Slowpump
Solar Force Piston Pump draws water from a shallow well, spring, pond, river or tank. It can push water up to 230 ft. and over long distances for a variety of applications and uses. Solaram Surface Pump draws water from a shallow well, spring, pond, river or tank. It can push water up to 960 ft. and over long distances for a variety of applications and uses. It can be powered directly from a photovoltaic array to fill a many water storage systems. Solar Slowpump was the world’s first commercially available low power solar pump. It was developed by Windy Dankoff in 1983, in response to those who said “That’s impossible”.  A great low power surface pump solution!

Suncentric Surface Pump

SunCentric TM uses solar-electric power to pump as much as 50,000 gallons per day from shallow water sources. Applications include irrigation, livestock, domestic water, pond management, water treatment, solar water heating, hydronic space heating, fire protection, and many more... PS150 Booster Pump provides city water pressure, anywhere. It is economical for domestic water supply, drip irrigation, and water purification systems. BADU TOp12 uses solar-electric power to pump water. It is cost-effective for swimming pools, especially where utility rates (or daytime peak rates) are extremely high.